ReadySHARE Access
After installation, you can insert a USB storage device into the USB
ports on the modem router and share the contents with others on the
network. (If your USB device has special drivers, it is not compatible.)
If your USB device needs a power supply, you have to use it when
you connect the USB device to the USB port. It might take up to 2
minutes before the USB drive is ready for sharing after you connect it.
To access your USB device:
On Windows systems, use any of these methods:
Select Start > Run and enter \\readyshare in the dialog box.
•
Click OK.
•
Open Explorer or Safari and enter \\readyshare in the address
bar.
•
Open My Network Places, and enter \\readyshare in the address
bar.
On Mac systems, do this:
1.
Select Go > Connect to Server.
2.
Enter smb://readyshare as the server address.
3.
Click Connect.
The readyshareconnect.exe file (for Windows) is available to
download here:
USB port
on the rear
www.netgear.com/readyshare
11
USB port
on the side