Powering Off The Projector - Optoma EX785 Service Manual

Delta Elec. Inc.

Powering Off the Projector

1. Press the "Power " button on the remote control or "POWER" button on the rear of the
projector two times with one second interval in between
of button will display the following message on the screen.
Press the button again to confirm the shut down. If the button is not pressed,
the message will disappear in 15 seconds.
2. The cooling fans continue to operate for about 10 seconds for cooling cycle and the
Power LED will turn blue.
When the light is solid red, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait until the projector has completed the
cooling cycle and has entered standby mode.
3. Disconnect the power cord from the electrical outlet and the projector.
4. Do not turn on the projector immediately following a power off procedure
Company Confidential
80
EX785_ EW775
Optoma___________________
to turn off the projector. First push
Delta________________
2010/01/05