Using The Projector; Powering On / Off The Projector - Optoma UHD380x User Manual

USING THE PROJECTOR

Powering on / off the projector

Enter
Enter
Powering on
1. Securely connect the power lead and signal/source cable. When connected, the On/Standby LED will
turn red.
2. Turn on the projector by pressing the "
3. A start up screen will display in approximately 10 seconds and the On/Standby LED will be flashing
blue.
The first time the projector is turned on, you will be prompted to do the initial setup including selecting the preferred
language, projection orientation, and power mode settings.
[Select Language]
or
" button on the projector keypad or the remote control.
[Select Projection Mode]
19
English