To Replace The Lamp Module - Optoma EX785 Service Manual

Delta Elec. Inc.
Company Confidential
92
EX785_ EW775
Lamp Replacing Procedure:
1.
2.
3.
4.
5.
6.
7.

To replace the lamp module,

reverse the previous steps.
Turn on the projector and do "Lamp Reset"
after the lamp module is replaced.
Optoma___________________
Switch off the power to the projector by
pressing the Power button.
Allow the projector to cool down at least 30
minutes.
Disconnect the power cord.
Unlock the lamp cover.
Pull up and remove the cover.
Use a screwdriver to remove the screws
from the lamp module.
Pull out the lamp module.
Delta________________
2010/01/05