Delta Elec. Inc.
8-2. Ceiling Installation
To prevent damage to your projector please use the recommended mounting package
for installation.
If you intend to use a third party ceiling mount, ensure that the screws meet the
following specifications:
1.Screw Type: M4
2.Maximum screw length: 11 mm
3. Minimum screw length: 9 mm
Refer to the following diagram to ceiling mount the projector.
Company Confidential
93
EX785_ EW775
Optoma___________________
Warning:
1.
If you buy ceiling mount from other
company, please be sure to use the
correct screw size.
Screw size will be different on different
mounts.
It depends on the plate thickness.
2. Be sure to keep at least 10cm gap
between the ceiling and the bottom of
the projector.
3. Avoid installing the projector near a
heat source.
Delta________________
2010/01/05