Optoma EX785 Service Manual page 61

Delta Elec. Inc.
If the driver test application does not launch automatically, run the "Launch FlashToolBL.exe"
from installed short cut at
FlasToolBL.exe
Company Confidential
61
EX785_ EW775
Program> Digital Zoom Projector> projector flashtool> Launch
(Step 10) Make sure that the USB cable is firmly
connected between projector and computer connect the
power cord to the projector, and move the power switch
in its ON position (if available) so that projector is in the
STAND BY mode
Press <Down>, <Up>, <Right>, <Up> key in sequence on
keypad. The power and lamp LED will blink and the
Projector Control mode will be enabled.
(Step 11) The New Hardware Wizard launched at the first
time Windows detects a new USB device attached. Select
"No, not this time" and Click on the "Next" button to
continue. (This dialog may change on different Windows
version)
(Step 12) Select "Install the software automatically"
Click on the "Next" button to continue.
In case the wizard cannot find the driver (the
ProjectorControl.inf), please select the other advanced
option and specify the driver location manually.
(Normally at C:\Program Files\Digital Zoom
Projector\Projector Flash Tool)
(Step 13) Windows updates the USB Projector Control
driver when found.
Optoma___________________ Delta________________
2010/01/05