5-4.Powering On/Off The Projector - Optoma EX785 Service Manual

Delta Elec. Inc. EX785_ EW775
5-4. Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cover.
2. Connect the power cord to the projector.
3. Turn On the connected devices.
4. Ensure the Power LED turns amber and then press the power button to turn on projector.
The Power LED will now flash blue.
The startup screen will display in approximately 30 seconds. The first time you use the projector,
you can select your preferred language and Power Mode setup after the startup screen display.
If the connected device is a PC, press the appropriate keys on the computer keyboard to
switch the display output to the projector.
If more than one input device is connected, press the "Source" button sequentially to switch
between devices.
Company Confidential Optoma___________________ Delta________________
79
2010/01/05