Using The Control Panel Keys; Understanding The Indicator Lights - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual
2-4

Using the Control Panel Keys

The three control panel keys perform the following functions:
On line/Off line Toggles the printer between
online and offline. When online, the printer prints
any data it receives. When offline, the printer
stops printing and cannot accept data (but can
accept protocol commands) from the host
computer. For most menu panel operations, the
printer must be offline.
Feed/Reload When the printer is offline, you can
use this key to advance the media. Pressing this
key once advances media to the next print point.
Pressing this key twice feeds an entire label through the printer.
Cancel Press this key to delete the current print job after the current label has
finished printing. The printer starts the next print job immediately.

Understanding the Indicator Lights

The control panel has three lights that indicate the current operating status of
the printer.
On line This light indicates the printer is online (it can receive data from the
host computer). When the printer is online, you can only access Operator menu
commands.
Alert This light flashes for conditions that require your attention, such as an
open paper path. A message describing the alert condition also appears on the
control panel display.
Power This light remains on as long as the printer is turned on and is receiving
power.