Installing A Memory Card; Figure 2-8 Location Of Power Switch; Figure 2-9 Installation Of A Memory Card - Hitachi GR2000-B Series Quick Start Manual

Hitachi Gigabit Router GR2000-B Series Quick Start Guide
1. As shown in Figure 2-7, make sure that the power switch is depressed in the OFF
(0) position and plug the other end of the cable into the AC outlet you plan to use.
Power Switch

Figure 2-8 Location of Power Switch

2.7

Installing a Memory Card

This procedure shows the process for installing and removing a memory card from
memory card slot 0. The operations for the memory card slot 1 are same as those for
the memory card slot 0.

(1) Installing a Memory Card

1. Insert a memory card in the position shown in Figure 2-9 and Figure 2-10 below.
When successfully inserted the lever next to the slot will be pushed forward.
Memory Card
(Part number
should be face up)

Figure 2-9 Installation of a Memory Card

Note: When inserting a memory card, the surface labeled with the part number
*
"HN-F9531-MC64X (BMC64)" should be face up.
2-8
Memory Card
Slot
ON
OFF
GR2K-GA-0008
Rev. 1.00