NordicTrack 29822.1 User Manual page 11

9. Set the Console Base (98) face down on a soft
surface to avoid scratching the Console Base.
Remove the two screws (A) from the Pulse
Crossbar (81). Remove the Pulse Crossbar and
discard the screws.
Remove the four 5/16" x 5/8" Screws (11) from
the Console Frame (101). The Screws will be
used in a later step.
10. Identify the Left and Right Trays (95, 96), which
are marked "Left" and "Right."
Attach the Trays (95, 96) to the Console Base
(98) with eight #8 x 1/2" Screws (1). Note: It may
be easier to start the two inside Screws and
then slide the Trays into place before tightening
the other six Screws.
Note: It may be necessary to rotate the Console
Frame (101) upward when attaching the Trays
(95, 96).
9
4
11
81
10
96
1
1
11
101
98
A
11
101
1
95
98
1
1