Removing The Power Connector Cable And Modem Cable - HP Pavilion dv2000 Maintenance And Service Manual

Removal and Replacement Procedures
2. Remove the Phillips PM2.5×5.0 screw 1 that secures the
connector frame to the base enclosure.
3. Remove the connector frame 2 to the base enclosure.
4. Remove the power connector 3 from the connector frame.
5. Remove the modem connector 4 from the connector frame.

Removing the Power Connector Cable and Modem Cable

Reverse the above procedure to install the power connector cable
and modem cable.
5–72 Maintenance and Service Guide