Sony HCD-ZX6 Service Manual page 23

• Display when an error occurred (CD Error Code Mode)
Procedure:
1. Press x (TAPE B) button, [TUNER ENTER] button and [DISC
SKIP] button simultaneously to enter the error code display
mode.
2. The fluorescent indicator tube displays the number of total error.
3. Each time M (CD) button or m (CD) button is pressed,
display change as below.
Display of
Total Error
FF button
Display of
AMS (+)
Mechanical
button
FF button
Display of
AMS (+)
No Disc
button
4. To clear the error record, operate the cold reset. (Refer to the
"MC COLD RESET")
5. To release from this mode, press the ?/1 button or disconnect
the power plug to turn the power OFF.
• Display of total error
Em **Ed**
Em**: The number of mechanical errors.
Ed**: The number of no disc errors after chucking the disc.
• Display of mechanical errors
M*$$%%&&##00
M*: The number of mechanical error ("00" is latest one)
(Press > (CD) button or . (CD) button to display next
error)
$$: Not used
%%: Loading related error (Second figure is not used)
D: Stop by the problem other than mechanical problem
while closing.
E: Stop by the problem other than mechanical problem
while opening.
C: Stop by the problem other than mechanical problem
while chucking up.
F: Stop by the problem other than mechanical problem
while chucking down.
&&: Emerging error
01: Stop while chucking up.
02: Stop while chucking up.
03: Time-out of EX-CHANGE open.
05: Time-out of EX-CHANGE close.
##: Not used
FR button
AMS (–)
button
Error
FR button
AMS (_)
button
Error
• Display of no disc errors
D*$$%%&&##00
D*: The number of no disc error ("00" is latest one)
(Press > (CD) button or . (CD) button to display next
error)
$$: Error type
01: Focus error
02: GFS error
03: Setup error
%%: Not used
&&:
00: No disc judgment without chucking retry.
01: No disc judgment after chucking retry.
##: The state when judged as no disc
01: Stop
02: Setup
03: TOC reading
04: Access
05: Playback
06: Pause
07: Manual search (Play)
08: Manual search (Pause)
[CD REPEAT 5 LIMIT OFF MODE]
• The number of repeat for CD playback is 5 times when the
repeat mode is "REPEAT ALL". This mode enables CD to
repeat playback for limitless times.
Procedure:
1. Press ?/1 button to turn the set ON.
2. Select CD function.
3. Press x (TAPE B) button, [TUNER ENTER] button and
[REPEAT] button simultaneously to enter the CD repeat 5 limit
off mode and the fluorescent indicator tube displays "LIMIT
OFF".
• To release from this mode, operate the cold reset. (Refer to the
"MC COLD RESET")
[CD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the
RAM to initial conditions. Use this mode when returning the
set to the customer after repair.
Procedure:
1. Press ?/1 button to turn the set ON.
2. Select CD function.
3. Press [EXCHANGE] button and ?/1 button simultaneously.
The set will power off automatically.
4. After the "STANDBY" blinking display finish, a message
"LOCK" is displayed on the fluorescent indicator tube and the
CD ship mode is set.
HCD-ZX6/ZX8
23