Table of Contents
Advertisement
OTHER FUNCTIONS
ASPECT MODE
The function shown as below is designed for the C52-WD9000 model.
You may set different aspect modes to view the image with different signal formats.
TV P.Size
This function is available for conventional TV broadcast (RF) signal input. When other non RF signals are
received, this function is not available and the size of the picture may not vary though TV P.Size can be set. This
is normal.
1. When conventional TV broadcast (RF) signal is received
Follow the steps on page 20, 21 to enter the menu, then access the Function menu and select the TV P.Size. Press
the
cursor buttons to change between three different modes including 16:9, 4:3 and Expanded.
If the P.SIZE button is pressed, the aspect modes will switch between six different modes,
16:9Zoom , 4:3 ,
When you press the P.SIZE button, the aspect mode will change to
Expanded , 4:3Zoom1
TV, the aspect mode will automatically return to the mode that you set in TV P.Size option.
2. When video, s.video or non HD component signal is received
Press the P.SIZE button to switch between six different modes,
4:3Zoom1
and
Please see the following on each of six modes for details.
`
Suggested
aspect
mode
Expanded
or
4:3Zoom2
4:3Zoom2 .
For example:
Conventional TV
broadcast format
4:3Zoom1
and
4:3Zoom2 .
mode. However, if you change program No. or power on the
16:9 , 16:9Zoom , 4:3 ,
Signal sources
For example:
For example:
widescreen
signal transformed
cinema
from HD
42
16:9 ,
16:9Zoom , 4:3 ,
Expanded
For example:
signal transformed
from HD
16:9 ,
Advertisement
Table of Contents
