Channel Manager - Hitachi 55HDX61A Operating Manual

CHANNEL MANAGER

Chan.
Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel
Manager
List.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
Setup
Power Swivel
Move Sel.
SEL
Press CURSOR PAD , to highlight function, then press the SELECT button or CURSOR PAD
This feature will select Antenna options.
Set The Antenna
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move Select
SEL
Press CURSOR PAD , to highlight function, then press the SELECT button to select.
Press the EXIT button to quit or select SET THE ANTENNA to return to the previous MENU.
When a CableCARD is installed, antenna settings will be set automatically to "Connect Cable to Ant A only".
NOTE:
Auto Channel Scan
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move Select
SEL
Press CURSOR PAD or
Press CURSOR PAD or
Press the SELECT button to start Auto Channel Scan.
When a CableCARD is installed, Auto Channel Scan will not be available since channels will be fixed based on what was
NOTE:
agreed upon by you and your cable operator.
This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.
to highlight Ant A or Ant B.
to highlight the Start or Clear option.
Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Move SEL Return
or
Chan. Manager
Set The Antenna
( ) Connect Cable to Ant A and
Air to Ant B
( ) Connect Cable to Ant A only
( ) Connect Air to Ant A only
Cable Source
Cable(1) Cable(2)
or
Move Return
SEL
Chan. Manager
Auto Chan. Scan
Ant A
Auto Channel Scan
Start
Ant B
Auto Channel Scan
or
Start
Move Return
SEL
63
to select.
Reset
Reset