Hitachi 55HDX61A Operating Manual page 38

IEEE1394 Use this function to control your devices with digital interface capability. Press the INPUTS button, CURSOR PAD and
SELECT button to select IEEE 1394.
(When an IEEE1394 device is not connected)
INPUTS
Input 5
RGB
IEEE 1394
Photo Input
Ant B
Move
(When an IEEE1394 device is connected)
INPUTS
Input 5
RGB
IEEE 1394
Photo Input
Ant B
Move
[DEVICE MAKER
Counter
DVHS1
ANT
Move
Move
Use CURSOR PAD or to highlight connected device (example D-VHS1).
Use CURSOR PAD to select connected device (example D-VHS1).
Use CURSOR PAD cursors to highlight POWER.
Press the SELECT button to power on the device.
Use CURSOR PAD cursors to select D-VHS operation.
Press down on the CURSOR PAD to enable the selected operation.
Use CURSOR PAD cursors to highlight the TV IN/OUT operation.
Press down on CURSOR PAD to select: TV IN is DVHS
NOTES: 1. The digital device will be automatically recognized if properly connected.
2. Four (4) IEEE1394 devices can be listed on the menu, but only 1 device at a time can be used. If a fifth device is
connected, it will replace the first device on the menu list.
3. This TV's IEEE1394 connection is not compatible with a DV camcorder (Digital Video Camcorder) or a PC.
4. The On-Screen-Display will not disappear until the EXIT button is pressed.
5. Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other
manufacturers devices should be brought to the attention of those manufacturers.
6. TV IN/OUT functions are not available when DVHS is in playback or recording.
Sel.
SEL
Sel.
SEL
DEVICE MODEL
: 00:11:30
00:00:00
POWER
TV TV
In/Out:
Select
SEL
TV OUT is ANT A
HOW TO USE THE REMOTE TO
CONTROL YOUR PLASMA TV
or
DVHS1
or
ANT
Move
]
38
Device not detected
00:00:00
POWER
TV TV
In/Out:
Select
SEL