Specifications - Emotiva XPR-2 User Manual

XPR-2

Specifications

Topology:
Dual differential inputs on each channel, with fully discrete, high current, short signal path
Class A/B Differential Reference power amplifier sections for each channel and Optimized
Class-H™ power supply topology.
Number of Channels:
2
Power Output (rated power; THD < 0.1%):
600 watts / channel (x2); both channels driven; into 8 Ohms.
1000 watts / channel (x2); both channels driven; into 4 Ohms.
Rated Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz + /- 0.1 dB.
Minimum Recommended Load Impedance (each channel):
4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads per channel).
Frequency Response:
5 Hz to 80 kHz +0 / -3 dB.
THD + noise:
< 0.0025%
Signal to Noise Ratio (8 Ohm load):
> 118 dB at rated power (A-weighted).
> 93 dB at 1 watt (A-weighted).
Damping Factor (8 Ohm load):
> 500
Speaker Output Connections:
Super heavy-duty custom Emotiva speaker binding posts - with clear acrylic insulators and
heavy duty gold plated contacts; designed to accept heavy-gauge bare cables, lugs, or
banana plugs.
Page 16