Emotiva XPR-2 User Manual page 16

XPR-2
Connecting an input source to your XPR-2
Your XPR-2 amplifier has separate balanced (XLR) and unbalanced (RCA) inputs for each
channel; a switch selects which input is active for each channel. Be sure to set this switch
correctly. We suggest using reasonably high quality cables, keeping cables no longer than
necessary, and avoiding running signal cables near power cables and speaker cables
whenever possible.
DO NOT connect a digital signal to the inputs of your XPR-2 (or you may damage it or your
speakers).
Connecting the Trigger Input and Trigger Output
The Trigger Input accepts a 12 VDC (nominal) trigger signal from another device via a
standard 1/8" mono plug. When the trigger is asserted, the XPR-2 will switch On; when the
trigger is removed, the XPR-2 will return to Standby mode. The Trigger Output sends out
12 VDC whenever the main power to the XPR-2 is On (and NOT when it is in Standby
mode) which can be used to switch on other units with trigger capabilities.
Page 13