Xpr-2 Rear Panel - Emotiva XPR-2 User Manual

XPR-2

XPR-2 Rear Panel

1 2 3 4 5
CHANNEL CHANNEL
(2) (1)
INPUTS INPUTS
AND AND
OUTPUTS OUTPUTS
TRIGGER
UN-BAL
INPUT OUTPUT
5-12 VDC 12VDC
BAL
+ - - -- +
115V 230V
6 7 8
1. Speaker Terminals
Super heavy duty, audiophile-grade, gold plated, five-way binding posts, with clear acrylic
insulation, accept the heaviest speaker cables and lugs as well as standard banana plugs
and bare wire.
2. Trigger Input and Trigger Output
The XPR-2 is switched On (from Standby) when a trigger signal is presented at the Trigger
Input; the XPR-2 returns to Standby when the trigger signal is removed. When the XPR-2 is
on, a 12 VDC signal is sent from the Trigger Output to control other devices.
3. Balanced (XLR) Input
Standard XLR connector accepts a line level balanced input.
4. Unbalanced (RCA) Input
Gold plated, solid machined brass RCA jack accepts line level unbalanced input.
Page 9