Page 1
® LEFT RIGHT LEFT RIGHT ----- 1K ----- ---- 470 ---- ---- 100 ---- ----- 47 ----- XPS-1 HIGH PRECISION LOW NOISE PHONO PRE-AMP POWER LEFT RIGHT XPS-1 High Precision Low Noise Phono Preamp...
Page 3
Emotiva XPS-1 - Installation and Configuration The Emotiva XPS-1 is a high precision low noise modular phono preamp, which is ideal for interfacing a turntable with any piece of high quality audio equipment that has an available line level analog input.
Page 4
4) Avoid running power cables or speaker wires near the interconnects going to your turntable. If interconnects must cross other cables, they should do so at right angles. 5) If your turntable provides a ground wire, connect it to the ground lug on the XPS-1 (next to the input connectors).
Emotiva XPS-1 - Installation and Configuration Configuring the XPS-1 Note: The XPS-1 may generate a loud click or pop if you change switch settings while it’s connected and powered on. You should always exercise caution if changing switch settings with the power on.
If you don’t get any sound at all..Make sure that the blue Power LED is lit. Make sure that the AC adapter is attached to the XPS-1 and connected to a live outlet. If you get steady hum or noise..