Specifications; Power Output; Speaker Output Connections; Power Supply - Emotiva basX A-700 User Manual

BAS

Specifications

Note: The following specifications apply to all three models
(BASX A-300, BASX A-500, BASX A-700) unless otherwise noted.

Power Output

Power Output Per Channel; two channels driven.
BASX A-300: 150 watts RMS / channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
BASX A-500: 110 watts RMS / channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
BASX A-700: 110 watts RMS / channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
Power Bandwidth (at rated power; 8 Ohm load)
20 Hz to 20 kHz (+ / - 0.07 dB).
Broad Band Frequency Response
5 Hz to 80 kHz (+ 0 / - 1.8 dB).
THD + noise
< 0.02% (A-weighted); at rated power; 1 kHz; 8 Ohms
Signal to Noise Ratio (8 Ohm load)
> 120 dB; ref rated power (A-weighted).
> 100 dB; ref 1 watt (A-weighted).
Minimum Recommended Load Impedance
4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads.
Damping Factor (8 Ohm load)
> 500.

Speaker Output Connections

Audiophile grade 5-way binding posts.

Power Supply

Linear power supply with heavy duty toroidal transformer.
X -300 / A -500 /
A
Page 14
-700
A