Xpa-1 Rear Panel - Emotiva XPA-1 GEN 2 User Manual

XPA-1

XPA-1 Rear Panel

4
1 2 3 5 6 7 8
9 10 11
1., 8. Speaker Terminals
Gold plated audiophile quality five-way binding posts with clear shields accept banana plugs,
lugs, or bare wire. Two positive and two negative binding posts are provided to facilitate bi-wiring
(both negative terminals are electrically the same, as are both positive terminals).
DO NOT connect the negative (-) speaker terminal of the XPA-1 to ground, or to the negative
speaker terminal of another amplifier. (Do not connect the XPA-1 to any speaker which requires
connections between the left and right speakers.) The XPA-1 is a fully differential amplifier and
the negative speaker terminal is NOT at ground potential. Connecting the negative speaker
terminal of the XPA-1 to ground, or to the negative speaker terminal of another amplifier
(including another XPA-1) will cause damage to the XPA-1 or your other equipment.
2. Status LED Switch
Disables the front panel status LED when set to Off.
3. Meter LED Switch
Configures the multi-segment LED bargraph meter to Off, left origin (left to right) or right origin
(right to left) operation.
Page 8