Danfoss TS715 Si Installation & User's Instructions page 21

Programming the ON/OFF Times in 24 hour
mode
1. Press PROG once until SET
ON TIME appears at the top
of the display.
Use the + OR - buttons to
set the time you want your
system to fi rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF to move
to Event 2.
Continue programming the
system ON and OFF times by
pressing:
a) NEXT ON/OFF button to
move to the next setting,
b) + or - buttons to amend the
time,
3. Press the PROG button to
return the unit to RUN mode
(time appears & colon in the
display begins to fl ash).
4. Proceed to page 22.
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
21