Accepting The Preset Programmes - Danfoss TS715 Si Installation & User's Instructions

Press DAY/HOL to display day and
month. Use the + or - buttons to set the
correct month (Jan = 1, Feb = 2 etc.).
Press DAY/HOL to display day and
month. Use the + or - buttons to set day
of month.
Press PROG to display the time.
The words SET TIME will appear at the
top of the display & the time will fl ash
on and off .
Use the + or - buttons to set the correct
time (press and hold to change in 10
min. increments).
Setting the Day
The day of the week is set automatically.

Accepting the preset programmes

If you are happy to use the preset programmes on page 13, you
don't need to do anything else.
To accept the factory presets just
press the PROG button once until the
time appears and colon in the display
begins to fl ash.
Your unit is now in RUN mode and will control your heating and
hot water according to the preset programmes.
15