Before You Start - Danfoss TS715 Si Installation & User's Instructions

Before you start

Open the fl ap on the front of the clock. Press the RESET button
using a non-metallic object (e.g. pencil/matchstick) until you
hear a click and the red light on the front of the unit comes on
and the LCD goes blank.
This will
programmes and sets correct day
and time.
To fully reset the unit see page 27.
Choice of 24hr or AM/PM display
Press and hold DAY/HOL & NEXT ON/
OFF for 2 seconds to toggle between
24hr clock and AM/PM display, as
required.
Setting the correct Time and Day
These settings are made during
manufacture and only need to be
made in the unlikely event that the
unit has lost the settings.
Setting the Date
Press and hold PROG for 5 seconds to
display year.
Use the + or - buttons to set the
correct year.
14
reinstate the preset
DAY/HOL
DAY/HOL
DAY/HOL