Danfoss TS715 Si Installation & User's Instructions page 19

Programming the ON/OFF Times in 7 day
mode
1. Press PROG once until SET ON
TIME appears at the top of the
display. Note the current day
is displayed. Press the DAY/
HOL button until the required
day is displayed.
Use the + or - buttons to
set the time you want your
system to fi rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF to move
to Event 2.
Continue programming the
system ON and OFF times
in this way by using the + or
- buttons to set the time you
want and pressing the NEXT
ON/OFF button to move to
the next setting.
3. Press DAY/HOL button once
only. The next day will appear
at the bottom of the display.
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
19