Optional Gobo - American DJ Accu Color 250 User Instruction

Accu Color 250™
Channel Value
3 88 - 90
91 - 93
94 - 96
97 - 99
100 - 119
120 - 139
140 - 159
160 - 179
180 - 199
200 - 219
220 - 239
240 - 255
American DJ - www.americandj.com - Accu Color 250™ Instruction Manual Page 35
®
DMX Traits cont.
Function
COLOR MOTOR RESET
NO FUNCTION
SHUTTER & DIMMER MOTOR
RESET
NO FUNCTION
INTERNAL PROGRAM 1
INTERNAL PROGRAM 2
INTERNAL PROGRAM 3
INTERNAL PROGRAM 4
INTERNAL PROGRAM 5
INTERNAL PROGRAM 6
INTERNAL PROGRAM 7
SOUND ACTIVE
Accu Color 250™
This unit comes with an optional gobo. There is also a 30°
beam angle lens (Optional But Not Included). Follow the
instructions below to install the gobo and/or lens when desired.
Caution! Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the
unit. The top half of the unit has the LED menu on it.
2. Unscrew the four phillips screws in the top half of the unit.
Remove the top half of the unit.
3. When you remove the top half you will be able to see four
thumb screws. See the picture below for reference.
Optional Gobo holder screws in here
American DJ - www.americandj.com - Accu Color 250™ Instruction Manual Page 36
®

Optional Gobo