Operating Modes - American DJ Accu Color 250 User Instruction

Accu Color 250™
is displayed, press ENTER.
8. The display shows "SC02". You have successfully down-
loaded the first scene.
9. Adjust the Step-time. needed by pressing the UP button.
10. Call up the second scene in your controller now.
11. Repeat steps 3-6 until all desired scenes are downloaded.
12. Press MODE/ESC to exit. The number of steps can be
defined under "Step" and the scenes can be called up under
"Run".
American DJ - www.americandj.com - Accu Color 250™ Instruction Manual Page 29
®
Editing Program Accu Color 250™
Operating Modes: The Accu Color 250™ can operate in three
different modes. This next section will detail the differences in
the operating modes.
• Stand alone mode -
The unit will react to sound, chasing through the built-in programs.
• Master/Slave mode -
You can daisy chain up to 16 units together to get a synchronized
light show without the need of an external controller. The units will
react to sound chasing through the several built-in programs.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
Designer.
Universal DMX Control:
versal DMX-512 controller such as the Elation
Elation
and the shutter (strobe). A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Accu Color 250™ uses three DMX channels. Channel 1
2. To control your fixture in DMX mode, follow the set-up procedures
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 17 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
7. For help operating in DMX mode consult the manual included
Stand-Alone Operation (Sound Active):
single unit or several units linked together, to run to the beat of the
music.
1. Access the main menu.
2. Tap the UP button until
™
This function allows you to use a uni-
Show Designer™ to control the color wheel, gobo wheel,
®
controls color, channel 2 controls shutter/dimmer, and channel 3
controls accesses the internal programs. See pages 34-35 for
detailed description of the DMX traits.
on pages 11-13 as well as the set-up specifications that are
included with your DMX controller.
the last fixture.
with your DMX controller.
"AUDI" is displayed, and Press ENTER.
American DJ - www.americandj.com - Accu Color 250™ Instruction Manual Page 30
®
Operation
Show
®
DMX Operator™ or
®
This mode allows a