American DJ Accu Color 250 User Instruction page 11

Accu Color 250™
MIC
- The internal microphone can be made more or less
sensitive.
1. Access the main menu.
3. Tap the UP button until "MIC" is displayed, press ENTER.
4. The display will show "M-01".
5. Press the UP or DOWN button to adjust the microphone sen-
sitivity between "M-01 - M-99".
6. Press ENTER to confirm when you have reached your
desired microphone sesitivity level.
7. Press MODE/ESC to return to the main menu.
DISP MAIN MENU -
VALU
Display the DMX-512 value of each channel -
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed, press ENTER.
3. Tap the UP button until "VALU" is displayed, press ENTER.
4. "VALU" should now be displayed, press ENTER.
5. The display should show "D-00". Press the UP button in
order to select the desired channel. If you select "D-05" the
display will only show the DMX value of the 5th channel
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
Now the display will change as per the 5th channel DMX
value.
D ON
Turns the digital display on and off -
1. Access the main menu.
American DJ - www.americandj.com - Accu Color 250™ Instruction Manual Page 21
®
System Menu Accu Color 250™
2. Tap the UP button until "NODE" is displayed, press ENTER.
3. Tap the UP button until "DISP" is displayed, press ENTER.
4. Tap the UP button until "D-ON" is displayed, press ENTER.
5. The display will show "ON/OFF". Press the UP button to
select "ON" to activate this function, or "OFF" to deactivate this
function.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
FLIP -
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed.
3. Press ENTER, the display will show "ON/OFF".
4. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
SPEC MAIN MENU -
RDMX
address via any DMX controller. This function is factory set
to "ON" already.
1. Access the main menu by pressing MODE/ESC.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "RDNI I" is displayed, press ENTER.
4. The display will show "ON/OFF". Press the UP button to
select "ON" to activate this function, or "OFF" to deactivate.
5. Press ENTER to confirm, and "PASS" will flash quickly.
American DJ
©
This function will reverse the display 180º.
With this function you are able to change the DMX
- www.americandj.com - Accu Color 250™ Instruction Manual Page 22
®
System Menu