Advertisement

American DJ
User Instructions
Revised 10/03
General instructions:
®
please read these operating instructions carefully to familiarize yourself
with the basic operations of this unit. These instructions contain impor-
tant safety information regarding the use and maintenance of this unit.
Please keep this manual with the unit, for future reference.
Unpacking:
DJ
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the carton
appears to be damaged, carefully inspect your fixture for any damage
and be sure all accessories necessary to operate the unit has arrived
intact. In the case damage has been found or parts are missing, please
contact our toll free customer support number for further instructions.
Do not return this unit to your dealer without first contacting customer
support.
Introduction:
pursuit for creating high quality affordable intelligent fixtures. The Con-
cept 2™ is a DMX scanner with a built-in 4.9mW diode laser. Both the
laser and the lamp can be operated at the same time for truly amazing
effects. This unit is light weight and compact which makes it a great
piece for mobile DJʼs and clubs. For best results use this unit with a fog
machine to enhance the output of the beams and laser.
Customer Support:
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:
00 p.m. Pacific Standard Time.
To purchase parts online visit http://parts.americandj.com
Caution!
attempt any repairs yourself, doing so will void your manufactures war-
American DJ
®
ranty. In the unlikely event your unit may require service please contact
4295 Charter Street
American DJ
Los Angeles Ca. 90058
www.americandj.com
Concept 2™
To optimize the performance of this product,
Thank you for purchasing the Concept 2™ by American
. Every Concept 2™ has been thoroughly tested and has been
®
The Concept 2
American DJ
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
There are no user serviceable parts inside this unit. Do not
.
®
American DJ Supply
- www.americandj.com - Concept 2™ Instruction Manual Page 2
©
®
Introduction
is part of American DJʼs continuing
TM
provides a toll free customer sup-
®

Advertisement

Table of Contents
loading

Summary of Contents for American DJ Concept 2

  • Page 1 Please keep this manual with the unit, for future reference. Unpacking: Thank you for purchasing the Concept 2™ by American . Every Concept 2™ has been thoroughly tested and has been ® shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping.
  • Page 2 Warranty Registration • During long periods of non-use, disconnect the unitʼs main power. The Concept 2™ carries a one yeare (365 days) limited warranty. • Always mount this unit in safe and stable matter. Please fill out the enclosed warranty card to validate your purchase.
  • Page 3: Warning Labels

    American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 5 American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 6 ©...
  • Page 4: Discharge Lamp Warning

    Concept 2™ is a nine channel DMX unit. The ® Caution: DMX address is set on the front panel of the Concept 2™. Your unit and Always replace with the exact same type lamp and fuse, your DMX controller require a standard 3-pin XLR...
  • Page 5: Operating Modes

    Pin 3 Not Used Do Not Use Not Used Do Not Use American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 9 American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 10 © ® © ®...
  • Page 6: Reset Function

    DMX address has to be adjusted. Note: The dipswitches on the back The DMX address is adjusteded by using the “1, 10, and 100” keys of the controller do not apply to the Concept 1 or Concept 2. directly below the LCD. Each press of a button will increase the 1.
  • Page 7: Dmx Values And Functions

    RELATIVE SPEED 16 - 23 GOBO 2 2 - 255 SLOW FAST American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 13 American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 14 © ® © ®...
  • Page 8 LAMP OFF AFTER 3 SEC. WHEN SHUTTER IS CLOSED 250 - 255 RESET AFTER 3 SEC. American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 15 American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 16 © ®...
  • Page 9 4. Reconnect main power. every 30-60 days. 5. Always be sure to dry all parts completely before plugging American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 17 American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 18 ©...
  • Page 10: Troubleshooting

    The sole responsibility of American DJ ®...
  • Page 11: Specifications

    ©American DJ Supply American DJ World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 / Fax: 323-582-2610 Web: www.americandj.com / E-mail: info@americandj.com American DJ Supply - www.americandj.com - Concept 2™ Instruction Manual Page 21 © ®...

Table of Contents