Tascam DR-V1HD Owner's Manual page 47

4. Press 5 and b to set the auto-recording mode.
OFF (default) Recording will not start/pause automatically.
PAUSE Recording starts automatically when the AUTO
REC LEVEL setting value is exceeded, and pauses
automatically when the input signal falls below that
level for more than five seconds. If the AUTO REC
LEVEL is exceeded again, recording continues in the
same file.
FILE INC
Recording starts automatically when the AUTO
REC LEVEL setting value is exceeded, and pauses
automatically when the input signal falls below that
level for more than five seconds. If the AUTO REC
LEVEL is exceeded again, recording continues in a
new file.
5. Press the center of the Pointing Stick to confirm the setting change and
return to the setting item list.
6. Press 5 and b to select AUTO REC LEVEL, and then press t or
the center of the Pointing Stick.
4 – Video/Audio Recording
7. Press 5 and b to set the level used to determine when a signal has
been input.
OPTIONS : -6dB, -12dB (default), -24dB, -48dB
8. When setting is complete, press the F3/HOME button to return to the
Home Screen.
9. Press the RECORD button to put the unit into recording standby (video/
audio). Recording starts automatically when the input signal exceeds the
AUTO REC LEVEL setting.
Recording stops automatically when the input signal drops below the
AUTO REC LEVEL for more than 5 seconds.
Recording restarts automatically when the input signal exceeds the
AUTO REC LEVEL. Recording continues in the same file if the
AUTO REC MODE is set to PAUSE. Recording is made to a new file if
the AUTO REC MODE is set to FILE INC.
10. Press the STOP/PAUSE button to stop recording.
NOTE
When in recording (video/audio) standby, REC SETTING appears above the
F3/HOME button, but is not possible to change the AUTO REC MODE
and AUTO REC LEVEL items from this screen.
To change these items, end recording (video/audio) standby and open the
Rec Option screen.
47
TASCAM DR-V1HD