Switching From The Disc Menu; Displaying The Disc Status For Dvd/Video Cd; About Divx; Other Useful Features - Alpine IVA-W502E Owner's Manual

Switching from the disc menu

For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
Touch [MENU] or [TOP MENU] to display the
menu.
2
Select an item to confirm it.
See "If a menu screen appears" on page 18.
• To play back a DVD-Audio disc, set "VCAP" in "Setting of the DVD-
Audio Playback Mode" (page 31).
Displaying the Disc Status for DVD/Video
CD
Use the procedure described below to display the status (title number,
chapter number, group number, etc.) of the currently playing DVD or of
the currently playing Video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
The operation menu screen is displayed.
2
Touch [ESC] within 5 seconds.
The display status is displayed for 5 seconds.
• To play back a DVD-Audio disc, set "VCAP" in "Setting of the DVD-
Audio Playback Mode" (page 31).
®

About DivX

®
DivX is a codec (software) programme to compress moving images
while maintaining image quality using a highly advanced compression
ratio and operating speed.
®
• Official DivX Certified product
• Plays all versions of DivX
standard playback of DivX
• DivX, DivX Certified, and associated logos are trademarks of
DivX, Inc. and are used under license
The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the DivX
extension "avi" or "divx".
The optimum size for DivX
Screen Size:
32 to 720 pixel (horizontal) × 32 to 576 pixel
(vertical)
With an aspect ratio other than 16:9, black bars may be
displayed on the left and right sides, or at the top and bottom of
the screen.
Image bit rate:
"average 4 Mbps, Peak 8 Mbps"
Home Theater Profile supported
The following audio recording systems are supported.
MPEG1 Layer II 64 to 384 kbps
MPEG1 Layer III 32 to 320 kbps
MPEG2 Layer III 8 to 160 kbps
MPEG2.5 Layer III 8 to 160 kbps
Dolby Digital 64 to 448 kbps (Max. 5.1ch)
24
-EN
® ®
video (including DivX 5) with
®
media files
®
mode with
®
disc playback is as follows:
Other Useful
Features

Adjusting the Audio

1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [AUDIO SETUP].
The AUDIO SETUP screen appears.
Display Example for Audio Adjustment Screen
• Touching [ ] or [ ] will scroll the list one line at a time.
• Touching [ ] or [ ] will scroll the list one page at a time.
• Touching [ESC] will change to the main source screen.
• The A.PROCESSOR menu items will differ depending on which
optional audio processor is connected. The IMPRINT audio
processor (PXA-H100) or External Audio processors may be used.
For details, refer to "IMPRINT Operation (Optional)" (page 46) or
"External Audio Processor (Optional)" (page 40).
Adjusting Balance/Fader
Touch [ ] of BALANCE/FADER, the adjusting screen of
BALANCE/FADER will be displayed.
Display Example for BALANCE/FADER Screen
Adjusting the Fader
A
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
• If an IMPRINT audio processor (PXA-H100) is connected to this unit
and you have set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.)
switch of the IMPRINT audio processor (PXA-H100) to 2.2ch
(3WAY), you cannot adjust the FADER mode. For details, refer to the
Owner's Manual of PXA-H100.
Adjusting the Balance
B
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15