Displaying The Numeric Keypad Input Screen - Alpine IVA-W502E Owner's Manual

Mobile media station

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Returns to the previous screen.

Changes to the REAR selection screen when "Setting

the Picture Output" (page 36) is set to ON.

The information about the current source.

e.g. The DISC image, Track NO. and Track time will be

displayed in DISC mode.

Touch [RADIO].

The screen changes to the Radio mode main display.

Display example for FM Radio main screen

Changes to the SOURCE selection screen (to Step

1 screen)

Displays the source name, such as radio band, etc.,

that is selected

Changes the display style, refer to "Selecting the

Display Style" (on page 13).

Displays time and volume level

Function Guide:

The function guide display varies depending on each

source.

The contents of the function guide change by touching

[P1/2]*, [P1/3]* or [P1/4]* on the function guide, and many

other operations can be performed.

* Display may vary depending on the connected devices.

Touch [SOURCE] on the main source screen to

change to another source screen, and select the

desired source from the SOURCE selection screen.

• After 5 seconds of each operation in the visual mode, the screen

changes to the visual screen only.

To display the main source screen, touch the display panel, then

touch [ESC] on the screen. The SOURCE selection screen appears

by touching [SOURCE] on the changed main source screen.

-EN

Displaying the Numeric Keypad Input

Screen

The numeric keypad input screen is displayed when the DVD mode is

selected for searching a title or chapter. It can also be used for entering a

country code or password for DVD setup.

Touch [10KEY] on the main source screen.

Touch the desired numeric key.

Display example for numeric keypad

Operation buttons of this area can be used while