Table of Contents
Advertisement
Accessories
This can only happen when the vehicle
is not running.
If a call comes in or goes out or if a
short message is received, connection
in data mode, on the GPRS network, is
suspended and resumes automatically
after the call.
The IrDA function can also be selected
through a program-mable key.
60
MYX-3_EN-10accessories.p65
Programming the alarm timing
You can be notified that your phone is ringing when
you are not in your car.
For an external warning, set the delay using the digits
or scrolling arrows.
Tick the box and validate by pressing OK.
Data parameters
Models myX-3 and myX-3d
You can set the serial link speed when using AT
commands.
Models myX-3d
With a built-in data/fax modem, your phone is a real
mobile office: you can exchange data and faxes without
a PCMCIA card by connecting your phone to your PC
using a simple series cable. You can now work
anywhere as if you were in your office.
Some models can use the PC's infrared port instead of
the series cable.
To do this, check the box in the Data parameters/IrDA
menu. Connection between the phone and the PC is
indicated by an icon on the idle screen.
Depending on the model, your phone comes with a CD
containing detailled information concerning the data
functions.
60
16/10/2002, 14:00
Advertisement
Table of Contents
