Table of Contents
Advertisement
Technical Characteristics
MYX-3_EN-15charactech.p65
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a base
station antenna, the lower the output.
Before a phone model is available for sale to the
public, compliance with the European R&TTE
directive must be shown. This directive includes as one
essential requirement the protection of the health and
the safety for the user and any other person.
This highest SAR value for this model phone when
tested for compliance against the standard was:
0.59 W/kg.
While there may be differences betwwen the SAR
levels of various phones and and at various positions,
they all meet the EU requirements for RF exposure.
* The SAR limit for mobile phones used by the public
is 2.0 watts/kilogram (W/kg) averaged over 10 g of
tissue. The limit incorporates a substantial margin of
safety to give additional protection for the public and
to account for any variations in measurements. SAR
values may vary in different regions on the world,
depending on national reporting requirements and the
network band.
73
73
16/10/2002, 14:00
Advertisement
Table of Contents
