Table of Contents
Advertisement
The ringer is stopped by pressing
any key; the alarm remains
programmed.
The alarm function remains active
when the phone is switched off. It is
not affected by silent mode.
11.3 Setting the timer
The same procedure is applied as
for the alarm function, but in this
case you start a time clock running against a
defined value. The phone must remain
switched on.
11.4 Configure your phone
with a car kit
(Depending on the model)
As regards the phone, there are several
options:
Programming the switch-off delay
on your phone
Set the phone off delay using the
numbers or scrolling arrows.
53
Press
The alarm function
Tick the box and validate by
is represented on
the screen by the
pressing OK.
symbol .
Programming the alarm timing
Permanent flashing
of this symbol
You can be notified that your
indicates that an
phone is ringing when you are not
alarm time has been
in your car.
programmed but the
Set the delay after which an
date and time clock
has not been
external warning is set off using
initialised.
the digits or scrolling arrows.
Tick the box and validate by
pressing OK.
11.5 Data parameters
To use your phone
with a hands free kit,
see the notes
You can set the serial link speed
supplied with the kit.
when using AT commands.
This delay starts
counting down as
soon as the end of a
call is detected.
to go to the next item.
This can only
happen when the
vehicle is not
running.
11. Other functions
Advertisement
Chapters
Table of Contents
