Specifications And Option; Specifications - Icom MA-500TR Instruction Manual

9

SPECIFICATIONS AND OPTION

■ Specifications

D General
• Frequency coverage
• Type of emission
• Current drain (at 12 V nominal) : TX: 1.5 A, RX: 0.7 A
• Power supply requirement
• Operating temperature range
• Antenna impedance
• Intermediate frequency
AIS1
AIS2
• Dimensions
(Projections not included)
• Weight
• I/O connector
D Transmitter
• Output power
• Modulation system
• Conducted Spurious emissions : Less than –36 dBm
D Receiver
• Sensitivity
(20% Packet Error Rate)
• Intermodulation rejection ratio
• Spurious response rejection ratio : More than 74 dB (AIS)
• Adjacent channel selectivity
• Conducted spurious emission
This equipment meets IEC 62287-1 specifications.
48
: 161.975, 162.025 MHz (default)
156.025–162.025 MHz
: 16K0GXW (GMSK)
: 9.6 to 15.6 V DC
(negative ground)
: –20°C to +60°C; –4°F to +140°F
: 50 ø nominal
: 1st: 21.700 MHz, 2nd: 450 kHz
: 1st: 30.875 MHz, 2nd: 450 kHz
: 165(W) × 110(H) × 123(D) mm,
6.5(W) × 4.33(H) × 4.84 (D) in
: Approximately 1.0 kg; 2 lb 20 oz
: High-density D-sub 15 pin
: 2 W
: GMSK
: –110 dBm
: More than 65 dB
More than 70 dB (DSC)
: More than 70 dB
: Less than –57 dBm (AIS)
D Dimensions
145 (5.71)
165 (6.5)
All stated specifications are subject to change without notice or obligation.
■ Option
• MB-75
flush mount kit
Used to mount the transponder to a panel.
31.4 77 (3.03)
(1.24)
Unit: mm (inch)