Icom MA-500TR Instruction Manual page 19

D NMEA Input/Output ports
• NMEA1/NMEA2/NMEA3 data speed
The data communication speed (baud rate) can be set for
each Input/Output port; NMEA1 and NMEA3.
NOTE: The data communication speed of NMEA2 is fixed
to 38400 bps. NMEA2 is used for communication between
the transponder and the Icom MarineCommander™ sys-
tem or a GPS receiver.
q Push [∫] or [√] to select "NMEA1" or "NMEA3."
• NMEA1 : Used for communication between the transponder and
a transceiver or a GPS receiver. (Default: 4800 bps)
• NMEA3 : Used for communication between the transponder and
a navigational equipment or a GPS receiver.
(Default: 4800 bps)
• You cannot select "NMEA2."
w Push [ENT] to select the data communication speed be-
tween 4800 bps and 38400 bps into that item.
• You can also select the option by pushing [Ω] or [≈].
e Repeat steps q and w to set another port.
r Push [CLEAR] to save and return to the Initial setting mode.
[∫], [√],
[Ω], [≈]
[ENT]
[CLEAR]
• GPS Input1/GPS Input2/GPS Input3
Set the NMEA1, NMEA2 and NMEA3 Input ports' capability.
q Push [∫] or [√] to select "GPS Input1," "GPS Input2" or
"GPS Input3."
• "GPS Input1" is for the NMEA1, "GPS Input2" is for the NMEA2
and "GPS Input3" is for the NMEA3 ports setting.
w Push [ENT] to toggle this function ON or OFF.
• You can also turn the function ON by pushing [≈], or OFF by
pushing [Ω].
ON : The GPS information that is received from the ex-
ternal GPS receiver of the selected port is sent to
the transponder.
(Default for "GPS Input2" and "GPS Input3")
OFF : The GPS information that is received from the ex-
ternal GPS receiver of the selected port is not sent
to the transponder. (Default for "GPS Input1")
e Repeat steps q and w to set other ports' capability.
r Push [CLEAR] to save and return to the Initial setting
mode.
[∫], [√],
[Ω], [≈]
[ENT]
[CLEAR]
3
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
11