Table of Contents
Advertisement
6
MENU MODE OPERATION
■ Menu mode items (Continued)
D Alarm Status
The Alarm Status screen shows the type, date and time of the
last 25 malfunctions that were detected.
Even if the alarm buzzer function is turned OFF, the alarm
status is displayed here. (p. 35)
q When the Alarm Status screen is displayed, push [∫] or
[√] to scroll the screen.
w Push [CLEAR] to return to the Menu mode.
• Description of the Alarm type
Alarm type
GPS
Appears when "GPS Malfunction" is detected.
RX
Appears when "RX Malfunction" is detected.
Appears when "CH A Noise Level Malfunction" is
CH A
detected.
Appears when "CH B Noise Level Malfunction" is
CH B
detected.
TX
Appears when "TX Malfunction" is detected.
Appears when "Antenna Open or Short Malfunction"
ANT
or "Antenna High VSWR Malfunction" is detected.
34
[∫]
[√]
[CLEAR]
Description
D User Setting
The User setting mode allows you to set the seldom-changed
settings, and you can "customize" the transponder operation
to suit your preferences and operating style.
q Push [MENU] to enter the Menu mode.
w Push [∫] or [√] to select "User Setting," then push [ENT].
e Push [∫] or [√] to select the desired item, then push [ENT].
r Select the desired option, shown in the Menu below.
The procedures are described to the right and continued
on the next page.
Time
t Repeat steps e and r to select other items.
Date
y Push [CLEAR] to save and return to the Menu mode.
Alarm type
u Push [CLEAR] to exit the Menu mode.
<SETTING ITEMS>
• Key Beep
You can select the silent operation, or you can have confirma-
tion beeps sound when you push a key.
➥ Push [ENT] to toggle this function ON or OFF.*
ON : A beep sounds when pushing a key. (default)
OFF : The key beep is OFF. (Silent operation)
[∫]
[ENT]
[√]
[CLEAR]
[MENU]
Hide quick links:
Advertisement
Table of Contents
