Table of Contents
Advertisement
2
PANEL DESCRIPTION
■ Function display (Continued)
D Target list display
In the plotter display, push [DISP MODE] to switch to the tar-
get list display, which shows all AIS targets being detected by
the transponder.
The AIS target data is sorted by the distance from your ves-
sel, and the closest target is located on the top of the list.
e
q THE NUMBER OF TARGETS
Shows the number of AIS targets which are being detected
by the transponder.
w KEY ENTRY GUIDE
Shows the key entry guide.
➥ Push [∫] or [√] to select an AIS target. (p. 16)
➥ Push [ENT] to display the detail screen of the selected
AIS target. (pp. 16, 17)
e TARGET INFORMATION
Shows the following AIS target information:
• MMSI code or name, if the name is programmed.
• Range (RNG) from your vessel to the target (unit: nautical mile)
• Bearing (BRG) from your vessel to the target (unit: degree)
6
D Danger list display
In the target list display, push [DISP MODE] to switch to the
danger list display, which helps you to find any dangerous
target whose CPA is within 6 nm (nautical miles) and TCPA is
within 60 minutes of your vessel.
q
w
q THE NUMBER OF DANGEROUS TARGETS
Shows the number of AIS targets which are being detected
by the transponder.
w KEY ENTRY GUIDE
Shows the key entry guide.
➥ Push [Ω] or [≈] to sort the danger target data. (p. 17)
➥ Push [ENT] to display the detail screen of the selected
AIS target. (p. 17)
e DANGER TARGET INFORMATION
Shows the following dangerous target information:
• MMSI code or name, if the name is programmed.
• CPA : Closest Point of Approach (unit: nautical mile)
• TCPA: Time to CPA (unit: minute)
e
q
w
Hide quick links:
Advertisement
Table of Contents
