Install The Battery And Storage Card - HTC Touch Pro2 Quick Start Manual

Htc touch pro2
Hide thumbs Also See for HTC Touch Pro2:
Table of Contents

Advertisement

4. Install the Battery and Storage Card

You need to remove the back cover before you can install the battery or storage
card. Also, make sure to always turn off the power before installing or replacing
the battery.
Note
Your Global Phone accommodates a GSM SIM card for global coverage. Refer to
the User Manual PDF for instructions on inserting a SIM card. Contact Telus for
information on purchasing a SIM card for your phone.
To remove the back cover
1.
Make sure your device is turned off.
2.
Remove the stylus.
Note You need to temporarily remove the
stylus to be able to remove or replace
the back cover.
3.
Firmly hold the device with both hands
and the front panel facing down.
4.
Push the back cover up with your thumbs
until it disengages from the device and
then slide it up to remove.
Quick Start Guide 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rhod500

Table of Contents