Install The Sim Card, Battery, And Storage Card - HTC Maple Quick Start Manual

6 Quick Start Guide

4. Install the SIM Card, Battery, and Storage Card

You need to remove the back cover before you can install the SIM card, battery or storage
card. Also, make sure to always turn off the power before installing or replacing the SIM
card and battery.
To remove the back cover
1.
Make sure your device is turned off.
2.
Hold the device securely with the front facing down.
3. With your thumb or finger, lift up the bottom of the
back cover.
SIM card
To install the SIM card
1.
Locate the SIM card slot and unlock the
SIM card lock by pressing it towards the
battery compartment.
2. Insert the SIM card with its gold
contacts facing down and the cut-off
corner facing away from the slot (check
the SIM card slot for the correct orientation when inserting the SIM card).
3. Slide the SIM card completely into the slot.
4.
Press the SIM card lock to lock the SIM card in place.
To remove the SIM card
1.
Remove the battery if it is installed.
2. Unlock the SIM card lock.
3.
Slide the SIM card out to remove it.
SIM card
lock