Wiring Connection - Kenwood KMM-257 Instruction Manual

INSTALLATION / CONNECTION

Wiring connection

Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control wire/ Antenna control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
ISO connectors
Pin Color and function
A4 Yellow
A5 Blue/White
A7 Red
A8 Black
ª
B1 Purple
·
B2 Purple/black
16
Fuse (10 A)
If no connections are made, do not let the wire come out from the tab.
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
ANT CONT
Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
Ignition wire
Unit
Battery wire
Battery
Power control
Ignition (ACC)
Earth (ground) connection
Rear speaker (right)
Rear/subwoofer output
To the steering wheel remote control adapter
To the power control terminal when using the
optional power amplifier, or to the antenna control
P. CONT
terminal in the vehicle.
To the terminal that is grounded when either
the telephone rings or during conversation. (To
connect the Kenwood navigation system, consult
MUTE
your navigation manual.)
(Red)
(Yellow)
Default wiring
Pin
ª
B3 Gray
·
B4 Gray/black
ª
B5 White
·
B6 White/black
ª
B7 Green
·
B8 Green/black
Rear ground terminal
R L
Antenna terminal
A7 (Red)
Vehicle
A4 (Yellow)
Color and function
Front speaker (right)
Front speaker (left)
Rear speaker (left)