Specifications; Cleaning And Maintenance; Storage - NewAir G56 Owner's Manual

YOUR HEATER IS EQUIPPED WITH A THERMOSTAT:
1. Turn the unit on by turning the thermostat dial away from the OFF position.
2. For faster heat up or to increase the heat output, turn the Thermostat Control knob all the
way to the right [MAX]. The thermostat function controls the temperature output. To
decrease the heat output, turn the knob counter clockwise.
3. Once the room reaches the desired temperature, slowly turn the Thermostat Control knob
counter clockwise until you hear a "click." This sets the heater to cycle ON/OFF to
maintain the desired heating temperature for energy efficiency.
4. To completely shut unit OFF, turn the thermostat dial to the OFF position and unplug the
heater.
Model Number
Power Supply
Power Consumption

CLEANING AND MAINTENANCE

Before any cleaning, make sure that:
1. The heater is turned OFF.
2. Disconnect power supply at source by removing plug from power outlet.
Regular Cleaning:
1. Do not use cleaning liquid or other chemicals to spray on the unit.
2. Interior dust can often be removed by using a vacuum cleaner with a crevice tool
attachment.
3. To clean enclosure, use a clean, soft and lightly damp cloth to gently wipe off the dirt from
the surface of the unit. Be sure not to wet the heating element and the switches. Allow the
unit to dry completely before using it.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER
AS THIS COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.
1. Perform the cleaning procedures described in "Cleaning/Maintenance."
2. Wipe all parts to dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.

SPECIFICATIONS

G56
240 volts AC, 60Hz
5600W

STORAGE

6