Connecting Devices; Earphones Connection; Remote Control Connection; Line-In Connection - TrekStor i.Beat 500 User Manual

Connecting Device
You can use the earphones to listen to music files or voice recordings. You can use the line-in
cable to connect an external audio player to the line-jack of this device for MP3 encoding. The
following illustration shows the earphones and line-in connections.

Earphones Connection

1. Plug the earphones into the earphone jack on this device.
2. Make sure the earphones connector is completely inserted in the jack.
3. Play a music file to check for proper connection.

Remote Control Connection

1. Plug the earphones into the earphones jack on the remote control.
2. Plug the remote control into the remote control jack on the device.

Line-In Connection

1. Plug one end of the line-in cable into the output terminal or the earphones
jack of an external audio player.
2. Plug the other end into the line-in jack on this device.
NOTE
Refer to the section on Encoding mode(Page 28) for MP3 format
encoding using the line-in connection.