Safety Devices And Warning Labels - JUKI DDL-8700B-7 Cautions For Safety

Warning label against
pinching
This label warns that
fingers or other parts
of human body can be
pinched in the thread
take-up lever.
Finger guard
This is a cover for
preventing contact
between fingers
and the needle.
Power switch
This is a switch for disconnecting
the power unit of the sewing machine
from the power supply.
Selection of the power switch
(EU type)
Be sure to use the IEC60204-1-com-
pliant power switch with rated current
of 20A or more and short-circuit
breaking capacity of 120 A or more.
In addition, be aware that the safety devices such as the "eye protection cover" and "finger
guard" are sometimes omitted in the sketches, illustrations and figures included in the Instruc-
tion Manual for the explanation's sake. In the practical use, never remove those safety devices.

Safety devices and warning labels

Thread take-up
lever cover
This is a cover for
preventing contact
between the human
body and the thread
take-up lever.
Warning label
The label gives the
minimum precau-
tions to be taken
when operating the
sewing machine.
CAUTION
Power switch
This is a switch for discon-
necting the power unit of
the sewing machine from
the power supply.
(Sewing machine for export in
general and for China type)
* The mounting location and
shape of the power switch
differs with the place of des-
tination.
Warning label
(Refer
against pinching
to the
This label indi-
warning
cates that there
label on
is a risk of pinch-
page i.)
ing fingers under
the control box.
(For CE type)
vii
High-voltage
caution label
This label
warns that there
is a high-volt-
age part inside
cover.
Pulley cover
This is a cover for
preventing entan-
glement of hands,
hair and clothes by
the hand pulley.