Safety Devices And Warning Labels - JUKI DDL-8700A-7 Cautions For Safety

Warning label against
pinching
This label warns that
fingers or other parts
of human body can be
pinched in the thread
take-up lever.
In addition, be aware that the safety devices such as the "eye protection cover" and "finger
guard" are sometimes omitted in the sketches, illustrations and figures included in the Instruc-
tion Manual for the explanation's sake. In the practical use, never remove those safety devices.

Safety devices and warning labels

Thread take-up lever
cover
T h i s i s a c o v e r f o r
preventing contact
between the human
body and the thread
take-up lever.
Finger guard
This is a cover for
preventing contact
between fingers
and the needle.
CAUTION
Warning label
T h e l a b e l g i v e s
t h e m i n i m u m
warning
precautions to be
label on
taken when oper-
page i.)
ating the sewing
machine.
Power switch
This is a switch for dis-
connecting the power
unit of the sewing ma-
chine from the power
supply.
Selection of the power
switch (EU type)
B e s u r e t o u s e t h e
IEC60204-1-compliant
p o w e r s w i t c h w i t h
rated current of 20A or
more and short-circuit
breaking capacity of
120 A or more.
v
High-voltage
caution label
(Refer
T h i s l a b e l
to the
w a r n s t h a t
there is a high-
v o l t a g e p a r t
inside cover.
Pulley cover
This is a cover for pre-
venting entanglement
o f h a n d s , h a i r a n d
clothes by the hand
pulley.