Advertisement
Warning label
against pinching
This label warns that fin-
gers or other parts of hu-
man body can be pinched
in the thread take-up
lever.
Warning label
against pinching
This label indicates
that there is a risk
of contact between
hands and fingers and
.
the button carrier
Eye protection cover
This is a cover for
preventing eye injury
due to flying pieces
of button broken by
needle breakage.
Finger guard
This is a cover for
preventing contact
between fingers and
the needle.
BR35
Electrical-shock
danger label
In order to
protect against
electrical shock,
safety precau-
(EU type)
tions to be taken
to avoid danger
are written on
this label.
In addition, be aware that the safety devices such as the "eye protection cover" and
"finger guard" are sometimes omitted in the sketches, illustrations and figures in-
cluded in the Instruction Manual for the explanation's sake. In the practical use, never
remove those safety devices.
Safety devices and warning labels
Warning label
The label gives
the minimum
precautions to
be taken when
operating the
sewing machine.
(Refer to
"Electri-
cal-shock
danger
label" on
page i.)
Thread take-up lever cover
(Refer
This is a cover for pre-
to the
venting contact between
warn-
the human body and the
ing la-
thread take-up lever.
bel on
page i.)
CAUTION
vi
Motor cover
This is a cover for
preventing contact be-
tween the human body
and the motor.
Warning label
The label gives
the minimum
precautions to
be taken when
operating the
sewing machine.
Power switch
This is a switch for discon-
necting the power unit of
the sewing machine from
the power supply.
Power switch (EU type)
This switch is
used for discon-
necting the power
unit of the sewing
machine from the
power supply. It is
also used as the
emergency stop
switch.
Selection of the power switch
Use the IEC60204-1-compli-
ant power switch with rated
current of 20 A or more and
short-circuit breaking capac-
ity of 120 A or more, which
has the operating section in
red against the yellow back-
ground.
Electrical-shock
danger label
In order to
protect against
electrical shock,
safety precau-
(EU type)
tions to be taken
to avoid danger
are written on
this label.
(Refer
to the
warn-
ing la-
bel on
page i.)
(Refer to
"Electri-
cal-shock
danger
label" on
page i.)
Advertisement
