Table of Contents
Advertisement
y BELL ICON
Appears or blinks when a matched signal is received, de-
pending on the presetting.
u CALL CODE MEMORY ICON
Appears when the call code memory is selected.
i BATTERY ICON
Appears or blinks when the battery power decreases to a
specified level.
Indication
Battery level
Full
blinks when the battery is over charged.
blinks when the battery is exhausted.
o ALPHANUMERIC DISPLAY
➥ Displays the operating channel number, channel name,
Set mode contents, DTMF code, and so on.
➥ The display mode can be set to one line or two lines.
Ask your dealer for details.
• In this instruction manual, the LCD illustration is described
using the two-line display mode.
!0 KEY ICONS
Indicates the programmed function of the front panel keys
([P0], [P1], [P2] and [P3]).
Charging
Exhausted
Mid
required
Battery
PANEL DESCRIPTION
Programmable function keys
■
The following functions can be assigned to the [EMR],
[Side1], [Side2], [Side3], [P0], [P1], [P2] and [P3] program-
mable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceiver's programming.
CH UP AND DOWN KEYS "UP" "DOWN"
➥ Push to select an operating channel. When [Rotary selec-
tor] selects "operating channel," this key is disabled.
➥ Push to select a transmit code channel after pushing [TX
Code CH Select].
➥ Push to select a DTMF channel after pushing [DTMF Au-
todial].
➥ Push to select a scan group after holding down [Scan].
➥ Push to select the desired application type, individual/talk-
group ID, TX status message and SDM (Short Data Mes-
sage) after pushing [Digital Button].
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6
Advertisement
Table of Contents
