Table of Contents
Advertisement
D
Transmitting notes
• Transmit inhibit function
The transceiver has several inhibit functions which restrict
transmission under the following conditions:
- The channel is muted ('Inaudible' mode;
does not appear.)
- The channel is busy.
- Unmatched or matched CTCSS is received, depending on
the presetting.
- The selected channel is a 'receive only' channel.
• Time-out timer
After continuous transmission for a preset time period, the
time-out timer causes the transceiver to stop transmitting.
• Penalty timer
Once transmission is cut OFF, it is further inhibited for a
period determined by the Penalty timer.
D
TX code channel selection
If the transceiver has [TX Code CH Select] assigned to it,
the display can be toggled between the operating channel
number or name, and the TX code channel number or name.
When the TX code channel number, or name is displayed,
"
" (Audible icon)
pushing [CH Up] or [CH Down] selects the TX code channel.
USING [TX CODE CH SELECT] KEY:
q Push [TX Code CH Select]— a TX code channel number
or name appears.
w Push [CH Up] or [CH Down] to select the desired TX code
channel.
e After selecting, push [TX Code CH Select] to set the
code.
• Return to the standby mode.
r Push [Call] to transmit the selected TX code.
USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:
If the transceiver has a [TX Code CH Up] or [TX Code CH
Down] key assigned, the preset TX code channel can be di-
rectly selected when pushed.
3
BASIC OPERATION
☞ Continued on the next page
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
14
Advertisement
Table of Contents
