Programmable Function Keys - Icom IC-F6020 Series Instruction Manual

■ Programmable function keys

The following functions can be assigned to [UP], [DOWN],
[P0], [P1], [P2] and [P3] programmable function keys.
Consult your Icom dealer or system operator for details
concerning your transceivers programming.
CH UP AND DOWN KEYS
➥ Push to select an operating channel.
➥ Push to select a transmit code channel after pushing [TX
Code CH Select].
➥ Push to select a DTMF channel after pushing [DTMF
Autodial].
➥ Push to select a scan group after holding down [Scan A
Start/Stop]/[Scan B Start/Stop] for 1 second.
ZONE KEY
Push this key, then select the desired zone using [CH Up]/
[CH Down].
What is "zone"?— Selected channels are assigned to a
zone according to how they are to be used in a group.
For example, 'Staff A' and 'Staff B' are assigned into a
"Business" zone, and 'John' and 'Cindy' are assigned into
a "Private" zone.
PANEL DESCRIPTION
SCAN A START/STOP KEY
➥ Push to start and cancel scanning operation.
• When Power ON Scan function is activated, push to pause the
scanning operation. And the paused scan resumes after the
specified period of time has passed.
➥ Hold down this key for 1 second to open the scan list,
then push [CH Up] or [CH Down] to select the desired list.
SCAN B START/STOP KEY
➥ Push to start and cancel scanning operation.
The scan restarts after the specified period of time has
passed when the scan (started with this key) is cancelled
except by this key operation.
➥ Hold down this key for 1 second to open the scan list,
then push [CH Up] or [CH Down] to select the desired list.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3